Publicité
Les langues disponibles
Les langues disponibles
TANDEM TRAILER
KIT PN 2878231
7. Position the pole support (#6) below the pole (#4) and fasten onto the box using
machine screws (#17),
not tighten at this time). Make sure that the pole (#4) rests on the support (#6). Fasten the (2) locking pins
assembly (#26) onto the pole (#4) using
nylock flange nuts (#16).
Tighten firmly. Flip the trailer on its tires.
8. Position and fasten the rear right (#10) and left reinforcements (#11) onto the box (used the pivot holes of the
rear panel as reference) using
nuts (#16) (do not tighten at this time).
7510316
A-7510316 Rév. B
flat washers (#19), and
(2) M8 (black)
(2) M8-1.25 X 20mm
Allen socket machine screws (#17) and
(12) M8-1.25 X 20mm
nylock flange nuts (#16) as illustrated (do
(4) M8-1.25
Allen socket machine screws (#17) and
Pivot Holes
of the Rear Panel
- 6 -
Allen socket
(4) M8-1.25 X 20mm
(2) M8-1.25
nylock flange
(12) M8-1.25
Imprimé en Chine / Printed in China
Publicité
