Publicité
Les langues disponibles
Les langues disponibles
TANDEM TRAILER
KIT PN 2878231
INSTALLATION INSTRUCTIONS
1. Lay down the
side panels (#1), the front panel (#2), and the rear lower reinforcement (#9) on a flat surface.
(2)
Insert the
(21) M8-1.25 X 20mm
not tighten at this time).
Verify that the bottom of the trailer is flat and all parts are aligned. Tighten firmly.
*
These mounting holes
are use for further step.
Do not put machine
screws in it.
2. Slide the main axle (#7) into the opening intented in the pole assembly (#4). Assemble the pole (#4) and the main
axle (#7) onto the
main axle supports (#5) using
(2)
nylock flange nuts (#16) (do not tighten at this time).
(12) M8-1.25
7510316
A-7510316 Rév. B
Allen socket machine screws (#17) and the
(12) M8-1.25 X 20mm
- 3 -
nylock flange nuts (#16) (do
(21) M8-1.25
Allen socket machine screws (#17) and
Imprimé en Chine / Printed in China
Publicité
