Bowers & Wilkins Zeppelin Air Mode D'emploi page 5

3. Using Zeppelin Air
Zeppelin Air can be operated either from the controls
on its body, illustrated in Diagram 3, or from the
remote control. If the remote control is to be used,
the battery insulating tab must first be removed. This
is illustrated in Diagram 4. Diagram 5 illustrates the
remote control key functions.
3.1 Switching On and Off
In addition to normal operating mode, Zeppelin Air
has both Standby and Sleep modes. In Standby
mode, all Zeppelin Air functions are switched off and
the power consumption minimised. In Sleep mode,
the Zeppelin Air wireless function remains connected
to the network. The Zeppelin Air indicator illuminates
dim red in Sleep mode and will turn off in Standby
mode.
Zeppelin Air can be switched from Standby mode by
the following actions:
• Pressing the Zeppelin Air Standby button
• Docking an iPod or iPhone.
Zeppelin Air can be switched from Sleep mode by
the following actions:
• Pressing the Zeppelin Air Standby button
• Pressing remote control Standby key
• Docking an iPod or iPhone.
• Streaming music to Zeppelin Air by Airplay.
• Play music through the AUX input.
When Zeppelin Air is switched on from Standby
or Sleep, the last input used will be selected if it is
still connected. If the last input used is no longer
connected, Zeppelin Air will automatically scan its
inputs AUX, Dock, USB, AirPlay, and select the first
connected one it finds. The Zeppelin Air indicator will
change to the colour that designates the selected
input. If AirPlay has been set up and no connected
input is found, Zeppelin Air will select the AirPlay
input by default. If AirPlay has not been set up
Zeppelin Air will enter Sleep mode.
Note: For first time power up when AirPlay has
not been set up the indicator will flash Yellow.
Note: The table in Section 4 describes all
the Zeppelin Air indicator colours and their
meanings.
To switch Zeppelin Air into Sleep mode, either press
the remote control Standby key or press and hold
the Zeppelin Air Standby button for 2 seconds. The
Zeppelin Air indicator will illuminate dim red.
To switch Zeppelin Air into Standby mode, press and
hold the Zeppelin Air Standby button for 4 seconds.
The Zeppelin Air indicator will turn off.
Note: It is not possible to switch Zeppelin Air into
Standby mode from the remote control.
Note: The Zeppelin Air will automatically
enter Sleep mode if left inactive for more than
30 minutes.
All manuals and user guides at all-guides.com
.
Diagram 3
Zeppelin Air controls explained
.
.
Diagram 4
Zeppelin Air insulating tab removal
Diagram 5
Zeppelin Air remote control explained
Only applicable when
AirPlay has been set up.
5