Publicité
Les langues disponibles
Les langues disponibles
THE APP+ CARD ALLOWS THE APP TO IDENTIFY THE TYPE OF Pc board. THE APP SHOWN THESE SPECIFIC PARAMETERS FOR ITS CONFIGURATION
CONTROL PANEL
EDGE 1
EDGE 2
PHOTOCELL 1
PHOTOCELL 2
AUTOTEST PHOTOCELLS
CLOSURE AFTER THE TRANSIT OF THE VEHICLE "OK CLOSE"
TRAFFIC LIGHT CONTROL "TLC"
ELECTRIC LOCK
GATE LOCK MAGNETS (AU VERSION)
GATE LEAVES OPENING DELAY TIME
GATE LEAVES CLOSING DELAY TIME
CONTEMPORARY OPENING/CLOSING
STOP COMMAND WITH BRIEF INVERSION
GRADUAL START
ELECTRONIC BRAKE
HELP TO RELEASE THE ELECTRIC LOCK
ENERGY SAVING (ACCESSORIES OFF WITH GATE STILL)
LOCK / UNLOCK SETTINGS
LOCK / UNLOCK COMMANDS
"HOLD-TO-RUN CONTROL" WITH SAFETIES ENABLED
INDUSTRIAL MODE (OPEN COMMAND IMPULSIVE, CLOSE MAINTAINED)
SYNCHRONIZATION OF 2 PC BOARDS
"ALWAYS WORKS" MODE IN PRESENCE OF FAULTY SAFETY DEVICES
MAINTENANCE CYCLES (ESTABLISHED, TOTAL, PARTIAL)
SPEED CHANGE IN CASE OF OVERCURRED CYCLES
VISUALIZATION OF PLANTS AND MAINTENANCE LOGS REGISTER
MOTOR TYPE SELECTION
DEFAULT SETUP RESET (REMOTE CONTROLS EXCLUDED) AND PARTIAL
SETUP RESET (ENGINE TIMES EXCLUDED)
TIMED OPERATION OR WITH ELECTRIC LIMIT SWITCHES
SELECTION 1-2 ENGINES
CONFIGURATION COPY FROM A Pc board TO ANOTHER
REMOTES COPY FROM A Pc board TO ANOTHER
PROCEDURE TO CHANGE INSTALLER PASSWORD
RIB GATE
To activate this card, simply download the RIB GATE App from the Apple Store or Google Play and register yourself as an installer.
ATTENTION: In an installation company, the first installer who registers himself will receive a company code. This company code must be used for the registration of all
colleagues, so all the installers of the same company can share all the systems made.
Once you have registered and feeded the system, the card will appear in the smartphone APP. Following the various steps you will then be able to enable the remote controls and smartphones
of the various users.
You can give permissions such as:
- Administrator / Owner of the house.
- User.
RIB Cloud => https://cloud.ribind.it
With personal account Installer - Administrator / Owner of the house
Via web browser it is possible to:
- access to your personal web space where all the registered systems are present.
- insert the installer logo and the installer data (the Users app is updated automatically by uploading the installer logo and its contact details).
- Automatically download data to the cloud every time the Bluetooth 4.2 signal connects.
- have access to all the features in the RIB GATE App. They will be available directly to those who are enabled to interact with the module (Installer, administrator / Owner).
L1
L1 24V
B2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
B2 24V/B2D 24V
P1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
G
B
P1 24V
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Publicité
