Little Tikes You Drive Excavator Instructions De Montage page 11

11
Last axle...promise!
1
Insert the short arm
axle (part I) through the
assembled short arm.
2
Insert the open end of the
short arm axle through the
hole located on the notch on
the digger arm.
Place a small cap nut (N) into
the small cap nut tool. Insert
the open end of the axle into
the cap nut and hammer to
secure.
3
FLIP OVER and insert the open end of the short arm axle
through the hole located on the notch on the scoop.
Place a small cap nut (N) into the small cap nut tool. Insert the
open end of the axle into the cap nut and hammer to secure.
All manuals and user guides at all-guides.com
Small cap nut tool
N
Small Capnut (1)
11
N
Small cap nut
N
Small cap nut