Technical Data - SKF TMHP Série Mode D'emploi

«БЕРГ АБ», (495) 727-22-72, promshop-biz@ya.ru, www.promshop
1.
The SKF self-centring hydraulic pullers are specially designed for
extracting large bearings and other components. To attain the high
forces that then normally are needed, these pullers are equipped with
a hydraulic jack and supplied with SKF hydraulic pump TMJL 100.
2.
No. of arms
Width of grip (mm/in)
Arm length (mm/in)
Claw length (mm/in)
Weight (kg/lb)
Piston displacement (mm/in) 100 (3.9)
Max. pressure (MPa/psi)
Max. force (kN/ton (US))
No. of arms
Width of grip (mm/in)
Arm length (mm/in)
Claw length (mm/in)
Weight (kg/lb)
Piston displacement (mm/in) 50 (2.0)
Max. pressure (MPa/psi)
Max. force (kN/ton (US))
No. of arms
Width of grip (mm/in)
Arm length (mm/in)
Claw length (mm/in)
Weight (kg/lb)
Piston displacement (mm/in) 40 (1.6)
Max. pressure (MPa/psi)
Max. force (kN/ton (US))
«БЕРГ АБ», (495) 727-22-72, promshop-biz@ya.ru, www.promshop
SKF TMHP 15/30/50
DESCRIPTION

TECHNICAL DATA

Self-centring hydraulic pullers
TMHP 15/260
3
195/386
(7.7/15.2)
264 (10.4)
37 (1.5)
34 (75)
80 (11,600)
150 (17)
TMHP 30/170 TMHP 30/350 TMHP 30/600
3 3
290/500 290/500
(11.4/19.7) (11.4/19.7)
170 (6.7) 350 (13.7)
30 (1.2) 30 (1.2)
45 (99) 47 (104)
50 (2.0)
80 (11,600) 80 (11,600)
300 (34) 300 (34)
TMHP 50/140 TMHP 50/320 TMHP 50/570
3 3
310/506 310/506
(12.2/19.9) (12.2/19.9)
140 (5.5) 320 (12.6)
32 (1.2) 32 (1.2)
47 (104) 54 (119)
40 (1.6)
80 (11,600) 80 (11,600)
500 (56) 500 (56)
3
290/500
(11.4/19.7)
600 (23.6)
30 (1.2)
56 (123)
50 (2.0)
80 (11,600)
300 (34)
3
310/506
(12.2/19.9)
570 (22.4)
32 (1.2)
56 (123)
40 (1.6)
80 (11,600)
500 (56)
7