Publicité
Les langues disponibles
Les langues disponibles
Assembly
Assembly of handle/feet to base is
required. See below.
Tools Required: Phillips-head screwdriver. Do NOT overtighten.
NOTE: Screws and washers may be partially screwed into base
for shipping purposes. Remove them to assemble handle/feet to
base. After assembly the handles/feet should feel secure. If the
handles/feet are loose, or the unit rocks when on a flat surface,
the handles are not installed properly. Loosen the screws and
realign handles; then retighten as shown. Periodically check
screws and retighten as necessary.
6. Long Screw
7. Split Lock Washer
8. Flat Washer
5
Publicité
