Braun KMM 30 Mode D'emploi page 4

Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you will enjoy the great taste of freshly ground
coffee with your new Braun coffee/espresso mill.
Caution
Read all instructions carefully before using this
product.
• This appliance must be kept out of the reach of
children!
• Before plugging into a socket, check whether your
voltage corresponds with the voltage printed on the
bottom of the appliance.
• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this
safety feature.
• Always unplug the appliance before cleaning.
• Braun electric appliances meet applicable safety
standards. Repairs on electric appliances must only
be done by authorized service personnel. Faulty,
unqualified repair work may cause accidents or
serious injury to the user.
• The cord of the appliance may only be replaced by
an authorized Braun Service Center as a special
tool is required.
Description
1
On/off switch and timer/measurer (the appliance
is switched off at setting «timer off/0»)
2
Motor housing
3
Grind fineness scale
4
Grind selector ring
5
Coffee bean container
6
Lid for the coffee bean container
7
Fineness marker on the grind selector ring
8
Lid for the ground coffee container
9
Ground coffee container
j
Measuring spoon with cleaning end
Plugging in
Pull out only as much cord from the cord storage as
you need to the outlet (a).
Grinding coffee
Notice: To retain the full flavor of the coffee bean, the
5
coffee bean container should be kept closed. Only
the immediately needed quantity of coffee should be
ground at a time.
Setting the degree of fineness:
3
The grind fineness scale
for espresso and Turkish-style coffee (fine to very fine
grind) and one for coffee brewing methods requiring
a medium to coarse grind, such as automatic drip
coffeemakers, hand-drip, French press and percola-
tors. The espresso section is marked «espresso». Set
the desired degree of coffee grind fineness by turning
4
the grind selector ring
7
points to the desired dot on the grind fineness
3
scale .
All manuals and user guides at all-guides.com
5
4
9
has two selections: one
so that the fineness marker
4
The grind selector ring
2
housing and can be turned clockwise to the
farthest dot (b). If you turn the grind selector ring
counter-clockwise, the grind will be coarser the larger
the dots are.
Notice: When using an automatic drip coffeemaker,
the coffee grind should not be too fine, as this could
result in the coffeemaker overflowing as water would
not be able to flow as designed through the filter. For
espresso-type coffee you should try starting with a
medium setting in the «espresso» section of the grind
3
fineness scale , and adjust so that each cup of
espresso takes approximately 25 seconds to brew,
once the coffee starts to drip out of the filter of your
espressomaker.
If it takes longer, the fineness setting must be
changed in the direction of «coarse» and vice versa.
Steam espresso machines require a coarser grind
within the espresso range than pump machines, since
the pressure developed by steam is not sufficient to
force water through a very fine grind.
Turning on the coffee/espresso mill:
The coffee/espresso mill is switched on by setting the
grinding time with the timer/measurer
the number of cups of coffee desired (c). Marking
numbers are shown on the timer scale.
By returning the on/off switch
off/0», you may stop or shorten the grinding process
at any time.
Removing the coffee grounds
When grinding is completed, remove the lid
the ground coffee container
grounds with the measuring spoon
coffee container can also be pulled off from the motor
2
housing horizontally (d). A measuring spoon full of
coffee grounds is approximately 0.23 oz/6.5 g,
generally the quantity needed for 1 cup of brewed
coffee or espresso.
Cleaning
Before cleaning, always first unplug the appliance.
Never immerse the motor housing in water and do not
hold it under running water. Wipe the motor housing
2
with a damp cloth only.
The coffee grounds outlet should be cleaned regularly
with the reverse end of the measuring spoon
6
The lid , the ground coffee container
8
may be cleaned in the dishwasher.
Specifications are subject to change without notice.
is screwed into the motor
1
, according to
1
to position «timer
8
from
9
and take out the coffee
j
. The ground
j
(e).
9
and the lid
5