Zanussi ZOHNQ3K2 Notice D'utilisation page 41

Step 3 Close the oven door halfway to the first
opening position. Then lift and pull to remove
the door from its seat.
Step 4 Put the door on a soft cloth on a stable sur‐
face and release the locking system to re‐
move the internal glass panel.
Step 5 Turn the fasteners by 90° and remove them
from their seats.
Step 6 First lift carefully and then remove the glass
panel.
Step 7 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass
Step 8
If the door is installed correctly, you will hear a click when closing the latches.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
panels in the dishwasher.
After cleaning, install the glass panel and the oven door.
90°
2
1
A
ENGLISH 41