Proline PSBS946SL Manuel D'utilisation page 72

4. Lift the door and place it on a soft
pad. Then remove the other door
following the same steps.
5. Unscrew bottom hinges.
6. After the appliance is positioned, install the doors following the steps above
in reverse order.
Install the appliance in a dry, well-ventilated room. The installation location
should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker,
radiator, etc.
To ensure adequate ventilation for the appliance, allow 50 mm of space between
the back of the refrigerator freezer and the wall and at least 50 mm of space
from the side to the wall, a height of over 50 mm from its top.
PSBS946SL IB.indd 69 PSBS946SL IB.indd 69
69
11/7/2022 2:57 PM 11/7/2022 2:57 PM