Publicité
Les langues disponibles
Les langues disponibles
The necessary fi les are now copied.
Now plug the USB adapter into an open USB port on your
computer. It takes several minutes to install the driver
programme.
To complete the installation, click „Finish".
After the installation is complete, the „Bluetooth Confi guration
Wizard" opens. Click „Next" to continue.
6
Assign a name to your computer. This name will be shown on
other Bluetooth devices if the discovery function is active or
they are searching for other Bluetooth devices in range. Also,
select the type of computer that you have (PC or laptop).
Click on „Next" to move on to the next confi guration page.
You can select the various Bluetooth services that your
computer makes available to other Bluetooth devices in this
step. If you are note sure which services you should enable,
refer to the manual of the Bluetooth device that you want to
connect to your computer. When you have made your selection,
click „Next" to continue.
The confi guration process is now complete. You can now
establish a connection to another Bluetooth device.
Click „Next" in order to establish a connection. If you want
to establish a connection later, click „Skip".
Publicité
