Kohler K-T97330-4 Guide D'installation Et D'entretien page 8

Cold Supply
Plug
Notch
4. Connect the Supplies
NOTE: The base has a blue mark and a notch on the cold supply
side.
Apply sealant tape on the ½" NPT hot and cold supply pipes and
thread into the base.
Insert the plugs into the base.
Turn on the water supply and check for leaks.
Turn off the water supply.
Secure the guard onto the base with the screws provided.
1240533-2-C
Screw
Guard
Base
Hot Supply
8 Kohler Co.