Handshower
Washer
Hose
8. Installation Checkout
Ensure the faucet handle is in the OFF position.
Turn on the water supply and check for leaks.
Point the hose into the bath and turn the faucet handle to the ON
position.
Pull the diverter out to send water through the hose to remove
debris.
Turn the faucet off to reset the diverter.
Turn the faucet on and run hot and cold water through the spout
to remove debris.
Check for leaks.
Turn the faucet off.
Install the handshower to the hose and place into the handshower
holder.
1240533-2-C
Aerator
Handshower
Holder
Handshower
Diverter
12
Handle
Kohler Co.