Publicité
Les langues disponibles
Les langues disponibles
1. Lower Exhaust: Using exhaust removal pliers, remove (3)
rubber hangers from exhaust.
3. Trim Splash guard: Using die grinder, trim area shown.
© 2022 Horizon Global™ Corp. - Printed in Mexico
2. Remove driver side splash guard: Using 14 mm socket, remove
(2) plastic nuts from splash guard. Using flat head screwdriver,
remove rivets from splash guard. Set aside for in safe spot for
reinstall.
4. Trim Fascia: Using marker, tape measure and tape, find center
of fascia. Using die grinder, trim fascia in area shown.
Leave this hole
Sheet 4 of 15
3"
C L
2-1/2"
76633NP
11-18-22
Rev. A
Publicité
