Publicité
Les langues disponibles
Les langues disponibles
Before the operation, please read the operation manual carefully to know
the equipment and the correct method of use. Please keep it for future
reference.
SAFETY PRECAUTIONS
1.Before installation, please check the grid for the Level II 240 v ~ + / - 10%
(60 Hz) ". Otherwise unable to use it.
2.Detection of the charging device has the function of user network circuit
load capacity; When the electric grid circuit of the user cannot bear the
charging power of the charging device, the device will automatically reduce
the charging power and then charge the electric vehicle. This function can
solve the problem of frequent tripping caused by the user's grid voltage
instability, circuit aging, and other problems; At the same time, it can
reduce the safety problems caused by the user's circuit problems. If the
charging power is reduced in use, it is a normal phenomenon.
3.This equipment has overvoltage, and under-voltage protection; It also
has an overload protection function. After the device automatically adjusts
the charging power, the device will automatically shut down the charging
and stop use if the user's grid voltage is still abnormal.
4.Install the equipment. The total input of the front-end must be installed
circuit breakers.
5.Do not use flammable, explosive, or combustible materials, chemicals,
combustible gas and other dangerous goods near the charging pile.
6.Keep dry and clean on the charging point. If there is any dirt, please use
a clean, dry cloth to wipe it. It is forbidden to touch the point pin.
- 3 -
Publicité
