still does not respond, open the front door of the electrical cabinet,
disconnect the air switch, and then close the air switch again.
5.2 Controller Boot Failure
Cause of the problem: The gun is not inserted properly; During the
charging process, someone pressed a button on the charging handle.
Solution: Put the gun back in place; Strengthen supervision after normal
charging to prevent someone from pressing the handle button during
charging.
5.3 End lock gun
Cause: The WIFI signal network is unstable, and unlocking failed. Vehicle
communication problem.
Solution: turn off the car starting key, turn off the engine and lock the car,
and then restart the car; If the problem cannot be solved, please contact
the car dealers!
6.0 List of Parts
Product specification
Certificate of
conformity
RFID card
Expansion screw
Charging cable hook
Wall hanging fixed
plate
INSTALLATION INSTRUCTIONS
General purpose accessories
Ac pile instruction
manual
Certificate of delivery
M1 card
Wall mount installation
M8*60 expansion
screw
Iron hook
Mounting the chassis
- 21 -
1 copy
1 piece
2 pcs
6pcs
1 pcs
1 pcs