Publicité
Les langues disponibles
Les langues disponibles
6.1 The installation method is wall hanging
a. Take out the mounting plate of the charging pile at the bottom of the
device, and carefully check the mounting size of the screw holes.
b. Select the parking space where the charging pile is to be installed. The
lowest position of the fixing plate of the charging pile should be 120cm
above the ground.
c. Drill four M8 diameter holes according to the positions of the screw
holes in the fixing disk, knock in the expansion rubber plugs, and secure
the mounting disk with nuts on the fixing chassis.
120
c m cm
EV
- 22 -
1. Fix the bottom plate on the
wall or support (pay attention to
the installation direction).
2. Hang the charging pile on the
bottom plate and install the
bottom plate with screw lock.
Publicité
