Publicité
Les langues disponibles
Les langues disponibles
c. Click Add to add the device, enter the WIFI pairing interface,
automatically identify the WIFI name of the phone.Click Next, and the
device will be automatically bound. After the binding is successful, a
message will be displayed indicating that the device has been successfully
added. Finally, click the icon of "Finish" and wait about 5 seconds for the
device to be bound.
d. You can also click "+" in the upper right corner of the APP to manually
add the device, select the category of "Energy saving" in the left column,
pull up the device type, find the device "Car charging pile (Bluetooth
+WIFI)", click to enter, and then click "Confirm indicator flashing" and "Fast
flashing" as prompted. Enter the WIFI password (WIFI password
connected to the mobile phone) and click Next to match the password, and
always set the bound device as prompted. After binding the device, charge
it according to the APP interface.
Note: The APP can set charging current, reserve charging time and other
functions; You can also query the real-time charging status. APP controls
the charging function, which is not limited by the charging mode of the
device.
INSTRUCTIONS FOR CHARGING DISPLAY
4.0 Instructions for Charging Devices without Touch display
(EV-A01-US009A/EV-A01-US009B Without touch display, no plug and
charge function).
4.1 Charging state The LED with three different colors is used as the
charging state indicator. After power-on, the RFID card can be swiped to
charge or stop charging. You can also use the mobile phone APP for
charging operations.
Note: 1. The RFID card randomly equipped can only open the pile for
charging.
2. Please contact after-sales staff to deal with the loss of RFID card.
4.2 Charging indicator LED indicator status table.
- 19 -
Publicité
