Emerson InSinkErator C1300 Installation Et Utilisation page 5

2
INSTALLING THE FAUCET - H778
A
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
B
Fiber
Gasket
Make sure to use fiber gasket
to ensure proper seal.
C
Gasket
An assistant may be needed
to hold the faucet in place
while securing the dispenser.
D
An assistant may be needed
to hold the faucet in place
while securing the dispenser.
All manuals and user guides at all-guides.com
H778
I I
Unpack dispenser components.
I I
On a firm, flat surface, carefully
straighten the copper tubing.
H778
I I
Ensure that the fiber gasket is
properly seated against the base
of the faucet.
H778
I I
Feed tubes down the hole in the sink
or countertop until the base is at rest
on the sink or countertop surface.
I I
Position faucet at the desired angle.
H778
I I
From under the sink, place the
semi-circular metal mounting plate
onto the threaded stud.
I I
Place wing nut onto the threaded
stud. Make sure faucet head is at the
desired angle. Tighten the wing nut
until snug, while ensuring the semi-
circular mounting plate extends
beyond the sink hole.
For Technical Assistance
1-800-845-8345
5