Algam Lighting MS100 Manuel D'utilisation page 16

MENU AND CONTROLS
Set
Settings
Set
Run Mode Random
DMX Address
Channel Mode Std 14CH
Top Lamp Temp
Sound Regulator
Invert Pan
Option
001
Run Mode
080
+005
OFF
DMX Address
Channel Mode
Top Lamp Temp
Sound Regulator
Invert Pan
Invert Tilt
Pan-Tilt Swap
Pan-Tilt Encoder
No DMX Signal
Display
Load Default
Description
Slave status: Receive DMX signals
DMX
from the console or Master
Sound
Auto run ;
Random
Master status: Auto run and send DMX
signal to slave
Auto
Press "OK" key enter into edit status,
then press "UP" "DOWN" to change
001-512
DMX address. press "OK" key save and
exit edit status.
Standard 14 Channel Mode
Std.14CH
001-110
-006 --- +006
ON for starting and ending , the default
OFF
is OFF.
ON
ON for starting and ending , the default
OFF
is OFF.
ON
OFF
Exchange Pan/Tilt channel (include
ON
Pan/Tilt Fine)
Use encoder (optocoupler) to
determine out of step and automatically
ON
correct position
Correct
OFF
(optocoupler)
Continue running as it is
KEEP
All motors return to the position and
CLEAR
stop running.
ON
OFF
Press the "OK" button to see the
confirmation dialog, press "OK" again
The key restores the default settings
position without encoder