Algam Lighting MS100 Manuel D'utilisation page 15

MENU AND CONTROLS
Manual control
Man
Manu
1.Dimmer
2.Shutter/Strobe
3.Pan
4.Pan Fine
5.Tilt
6.Tilt Fine
Advanced
Advan
Password is "Up Up Up Down Down Down", then press the OK key enter into the
Advanced Interface.
Option
Sensor Monitor
Reset Calibration
Zero Point Correction
This interface is used to control the current fixture and automatically enters the master
state (does not receive the DMX signal and sends a DMX signal to the slave).
Option
1. Dimmer
2. Shutter/Strobe
3. Pan
4. Pan Fine
5. Tilt
6. Tilt Fine
7. Pan/Tilt Speed
8. Color
9. Fixed Gobo Wheel
10. Rotation Gobo Wheel
11. Gobo rotate
12. Prism
13. Focus
14. Reset
Hall 1-6 State
Hall XY State
Pan Tilt Codewheel State
Pan Codewheel Step
Tilt Codewheel Step
Pan Calibration
Tilt Calibration
Color Calibration
Gobo Calibration
Focus Calibration
Rt Gobo Calibration
ON
Description
0-255
0-255
0-255
0-255
0-255
Orange indicates selected, Press
"OK" key enter into Edit status,
0-255
then press "UP" "DOWN" to
0-255
select, press "OK" save and Exit
0-255
edit status.
0-255
0-255
0-255
0-255
0-255
Press "OK" to see the confirmation
0-255
Description
After entering the sub-
interface, you can adjust the
motor such as X-axis and
Y-axis.
Reset position to
compensate for errors in
hardware installation,
Adjustment range -
128~+127, +0 means no
adjustment.