Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION
Power supply
DMX connection
INSTALLATION - RIGGING
This fixture can be installed on the floor on a flat and stable surface. It can be clamped to a
struss or similar rigging structure in any orientation.
Check that the rigging structure can support at least 10 times the weight of all fictures and equipment
which are installed on it.
When installing the fixture on truss, it is recommanded to use half-coupler clamp ( see below).
One or two pieces OMEGA ( depends on the version) brackets are supplied with the fixture . Fix
the rigging clamp with self-locking nuts to the OMEGA . OMEGA brackets are locked to the fixture
with 1/4 turn fast lock screw system.
Secure with safety cable !
Secure the fixture with safety cable.
PIN3
PIN2
Publicité
