Domo DO913DV Mode D'emploi page 49

www.domo-elektro.be
6. Attach the screws, hinge bracket and adjustable foot to the opposite side of the
bottom. Loosely secure.
7. Carefully set the door back into place. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the top
hinge. Insert the hinge back and screw it to the top of the appliance.
8. Use a spanner to tighten it if necessary.
9. Put the top cover back and fix it in place with the screws.
10. With the door closed, check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before finally tightening the bottom
hinge. Readjust the levelling feet as required.
49
DO913DV