Domo DO913DV Mode D'emploi page 48

DO913DV
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call
your local authorised service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty.
It is recommended to use a crosshead screwdriver and a spanner (both not supplied).
1. Remove the 2 screws on the back of the top cover.
.
2. Lift the top cover away from the fridge.
3. Remove the three screws and then remove the top hinge that holds the door in
place. Lift the door and place it on a padded surface to prevent it from being
scratched.
4. Remove the bottom screw, hinge bracket and adjustable foot from the bottom of
the appliance.
5. Remove the adjustable foot from another side of the bottom and transfer it to the
corresponding position on the opposite side of the bottom.
48