Dacor DOB30P977D Serie Manuel D'utilisation page 52

Troubleshooting
Problem Possible cause
The oven The oven controls have not
smokes been set properly.
excessively
The meat has been placed too
during broiling.
close to the element.
The meat has not been
properly prepared.
Grease has built up on oven
surfaces.
Food does not The oven controls have not
bake or roast been set correctly.
properly.
The oven rack has been
positioned incorrectly or is
not level.
The oven thermistor needs to
be adjusted.
52 English
DOB30P977D_AA_DG68-01313A-00_EN+MES+CFR.indb 52
Solution
See the Operating the oven Food does not
section starting on page 19. broil properly.
Reposition the rack to provide
proper clearance between
the meat and the element.
Preheat the broil element for
searing.
Remove excess fat from the
meat. Cut away fatty edges
that may curl, leaving the
lean intact.
Regular cleaning is necessary
when broiling frequently.
See the Operating the oven
section starting on page 19. The oven
temperature is
See the Using the oven racks
too hot or too
section on page 34.
cold.
There is water
See Temp adjust in the
dripping.
Settings section on page 43.
There is
steam coming
through the
crack between
the oven body
and the door.
Water remains
in the oven.
Problem Possible cause
The serving size may not be
appropriate.
The rack has not been
properly positioned.
The cookware is not suited for
broiling.
In some areas, the power
(voltage) may be low.
The oven thermistor needs to
be adjusted.
You may see water or steam
in some cases depending on
the food you are cooking. This
is not a product malfunction.
Solution
Refer to the Broiling
recommendation guide for
serving sizes on page 29, and
then try again.
See the Broiling
recommendation guide on
page 29.
Use suitable cookware.
• Preheat the broil element
for 10 minutes.
• See the Broiling
recommendation guide
on page 29.
See Temp adjust in the
Settings section on page 43.
Let the oven cool and then
wipe with a dry dish towel.
2020-07-07 5:15:35