Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
Start/Pause button
By pressing on the Start/Pause button, you may start the programme you have selected or
suspend a running programme. If you switch your machine to the standby mode, the Start/
Pause led on the electronic display will blink.
Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen
cannot be changed unintentionally. To activate child lock, press and hold button 2 and 3
simultaneously for at least 3 seconds. ''CL'' will flash on the electronic display for 2 seconds
when the child lock is activated.
If any button is pressed or selected programme is changed by the programme dial while the
child lock is active, the "CL" symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a programme is running, when the programme dial is
turned to the CANCEL position and another programme is selected the previously selected
programme continues from where it was left.
To deactivate the child lock, press and hold button 2 and 3 simultaneously for at least
3 seconds until the "CL" symbol on the electronic display disappears.
22
EN
Publicité
