Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2 Setting up the Doorbird IP Video door station
10.
Select "Save." Wait five minutes for the changes to become effective.
2.2 Option 2: Entering the SIP data in the Doorbird smartphone app
1.
Open the DoorBird App and log into the administration area under Settings > Administra-
tion using the administrator user and password credentials from the "DIGITAL PASSPORT"
document that was delivered with your DoorBird IP Video door station.
2.
Choose "SIP Settings" from the menu and activate the "SIP activated" switch.
3.
Enter the IP address or URL of your SIP server/fritzbox in the "SIP Proxy" field. For "SIP
User" and "SIP Password", enter the access data which you have assigned for your Door-
Bird IP Video door station in your Fritzbox or the Tek-SIP software.
4.
Toggle the "DTMF"-switch on, and for the "Relay 1 PIN", enter a unique PIN number of
your preference for controlling the door relay of your DoorBird IP Video door station from
YOUVI.
5.
Select "Save". If a "200" is displayed at the end of the page under "Last error code", the
registration was successful. If not, check whether the user name and password in the SIP
server and Doorbird interface are actually identical. Pay attention to upper and lower case.
If a "0" is displayed as error code, save again.
6.
Go back to the main administration area and tap on "SIP Numbers", then tap "Add".
7.
Under "Name", enter the panel name "Controlmini", for example. As "SIP address", enter
28
Publicité
Table des Matières
