Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 SIP server configuration
−
Under „Registrar" you can see the IP address of the Fritzbox. You need to enter this later
for the IP address of the SIP server:
5.
Confirm the assigned phone number and select "Next".
6.
Select "Accept all calls" and "Next".
7.
You will get an overview, which you can confirm with "Apply". Press any button on the Fritz-
box to confirm the input for the router.
Setting up the Doorbird door intercom in the Fritzbox:
8.
Under Telephony > Telephony Devices, go to "Configure new device" and select the option
"Door intercom system" and "Next".
9.
The connection is made via "LAN/WLAN (IP door intercom system)".
10.
Assign a name for the door intercom and press "Next".
11.
Enter a username and password for the door intercom and note them down.
−
Special characters, umlauts or spaces should be avoided.
−
Be sure to give a secure password.
12.
For "Route doorbells to", select the PEAKnx panel.
13.
Select "Next".
14.
You will get an overview, which you can confirm with "Apply".
23
Publicité
Table des Matières
