Publicité
ENG
The AENO AP1S Air Purifier is a household appliance designed to
disinfect and clean indoor air from allergens, pollen, fungal spores, dust
particles, smoke, animal hair, and unpleasant odors.
Specifications
Input voltage: 100–240 V (AC); frequency: 50/60 Hz. Rated power: 50 W. Operating
temperature: –10 °C to +50 °C. Dimensions (L × W × H): 270 mm × 303 mm ×
497 mm. Efficiency: 450 m
3
/h. Coverage: up to 60 m². Indoor air purification time:
0,5 hours. Noise level: in the night mode 25 dB (at a distance of 1 m). Built-in UV
LED. HEPA filter operation time: 2,200 hours. Emission power: +20 dBm/100 mW.
Package Contents
AENO AP1S Air Purifier, HEPA filter H13, quick start guide, warranty card.
Limitations and Warnings
ATTENTION! The device is equipped with a built-in UV LED. It is not allowed to
disassemble the device and turn it on when disassembled, because it may be
very harmful for eyes.
Make sure the purifier is unplugged before maintenance. Do not immerse the
purifier in water or any other liquid. After the end of the life of the HEPA filter, do
not turn on the purifier until you replace the expired HEPA filter. Do not use
aggressive and flammable chlorine- or alcohol-containing agents to clean the
purifier. Water is not allowed to enter the body of the purifier. Never rinse the HEPA
filter with water, and never clean it with a damp cloth. Use the device as described
in this Quick Start Guide and the complete User Manual only. Failure to follow the
instructions may result in fire and other hazardous situations, as well as injuries.
Do not use the device if it is damaged or cracked. Do not install the device
outdoors or near sources of water, including humidifiers. Do not expose the device
to direct sunlight, moisture or vibration. Do not drop, throw, disassemble the
device, or try to repair it on your own. Do not lay the power cable near radiators,
stoves, or heaters. Do not use cleaning agents or detergents to clean the device.
aeno.com/documents
7
Publicité
