Télécharger Imprimer la page

Lindy 38144 Manuel Utilisateur page 4

Publicité

Les langues disponibles

Les langues disponibles

User Manual
English
Introduction
Thank you for purchasing the HDMI & IR Cat.6 Extender. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical
support.
To ensure correct use, please read this manual carefully and retain it for future reference.
The HDMI & IR Cat.6 Extender is a simple to use plug and play solution which lets you extend an HDMI
AV signal up to 50m* using a single low-cost Cat.6 UUTP cable (not included). For added convenience IR
signals (20-60 kHz) can also be extended using the supplied IR Receiver and Emitter cables. Supporting
resolutions up to Full HD 1080p, including 1080p 3D, the Extender is designed for use in AV and digital
signage applications in a variety of settings such as home, education, business, retail and healthcare.
The Extender features an HDMI loop-through output on the Transmitter with simultaneous viewing so that
a local display can be connected for monitoring or to create an additional viewing zone. To ensure the
maximum compatibility when two displays are connected the EDID data, which determines the supported
video and audio formats, can be used from either a local monitor connected to the Transmitter or the
remote monitor connected to the Receiver.
Power over Cat.6 (PoC) functionality enables the Extender to operate from a single power supply
connected to the Transmitter, allowing the Receiver to be located where there is limited access to mains
power sockets making it ideal for retro fit installations. In addition to PoC functionality the Extenders slim
design and integrated mounting brackets make it easier to install in limited spaces behind modern flat
screen displays.
*Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or
introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
Package Contents
▪ HDMI & IR Cat.6 Extender with local HDMI Output
▪ 5V DC 1A Multi-Country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm
▪ IR Emitter Cable, 1m
▪ IR Receiver Cable, 1m
▪ Lindy Manual
Specification
▪ Extends HDMI (including HDCP) & IR signals via Cat5e/Cat6 UTP Cable
▪ Connection is via cat.5e/6/7 cable, up to 50m (CAT6 solid core recommended)
▪ Local HDMI Output allows local & remote displays to be used simultaneously
▪ Supports resolutions up to Full HD 1080p 60Hz (4:4:4 @ 8bpc / 4:2:2 @ 12bpc ) at 50m
▪ Supports Full HD 1080p24 3D according to HDMI 1.4
▪ Audio Formats: LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD
▪ PoC (Power over CAT6) feature allows requires only a 5V 1A PSU to be attached
▪ Supports 20 – 60kHz IR Frequencies
▪ Maximum HDMI Cable length, 3m in/out
▪ EDID can be selected from either the remote or local display
▪ Transmitter ports: HDMI Type A In, 1x CATX Out, 3.5mm IR Out & DC Socket
▪ Receiver ports: HDMI Type A Out, 1x CATX In & 3.5mm IR In
▪ Power consumption: 5W Max
▪ ESD Protection: Human Body model: +/- 8kV (air-gap discharge) +/- 4kV (contact discharge)
▪ Temperature: Operating: 0
o
o
o
o
o
o
o
o
C to 40
C (32
F to 104
F) / Storage: -20
C to 60
C (-4
F to 140
F)
▪ Relative Humidity: 20 to 90% RH (Non-condensing)

Publicité

loading