System Setup - Sylvania SDVD7040-E Manuel D'instructions

Press the SETUP Button, the setting menu will appear on the screen as below. During setting, using Direction
◄, ►, ▲, ▼
Buttons to select and highlight the function needed to set or reset. Press the ENTER/ OK Button
to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.

SYSTEM SETUP

1. If TV System is selected, it can be set to NTSC, PAL or AUTO to match the connected TV.
2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was
stopped last time.
3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is
paused for several minutes.
4. If TV type is selected, set the aspect ratio to match the connected TV.
5. If Rating is selected, press the
rating level, then press ENTER/OK button to confirm setting.
~ Rate levels:
KID SAFE: Kid safe
G: All ages
PG: Parental Guidance
PG 13: Parental Guidance less than 13 years old
PG-R: Under 17 years old, Parental Guidance suggested
R: Under 17 years old, Parental Guidance strongly
NC-17: 17 years old or above
ADULT: Adult only
6. If Password is selected, press the
"0000" to unlock the rating, press ENTER/OK button to confirm. Now the lock status will be
To change a new password, highlight the password column and enter a new four digit password under
unlocking status, press ENTER/OK button to confirm password changing. After password is changed,
the new password and default password can be used.
7. When Text to Speech is selected to ON, the player will have a voice during pressing each button, the default
is OFF.
8. If Default is selected and set it to restore, all settings will be restored to factory setting.
SYSTEM SETUP
SYSTEM SETUP
TV System
POWER RESUME
Screen Saver
TFT
TV Type
Rating
Password
Text to Speech
Default
►
button to enter rating level, press
►
button to highlight the
19
or button to select the desired
, then enter four digit default password
.