Hypertherm EDGE Ti Conditions De Service page 3

HARD DRIVE REPLACEMENT KIT
Save the setup files
If you can access your current hard drive, copy any customized setup files or other files to a USB memory stick or other
storage device.
1. Insert the storage device into one of the USB connectors on the front of the EDGE Ti.
2. Touch the Setups softkey, then touch Password.
3. Type 6931 as the password. (If this default password does not work, check with the system administrator to see if
another password has been created.) Then press Enter.
4. Touch the Save Setups softkey. Choose the desired location from the drop-down menu.
Note: It can take a few moments for the Windows operating system to detect an external storage device. If your
device is not included in the list of available locations that you can save to, touch Cancel and try again.
5. Touch OK to save the file.
6. Once the backup is complete. shut down the EDGE Ti and disconnect the electrical power.
2 Field Service Bulletin