ProMed 4030-SX2 Instructions D'utilisation page 18

D
ISPLAY AND DISPLAY MESSAGES
Speed reading (rpm x
1,000)
Pause/ standby / clockwise/anti-clockwise rotation
Clockwise rotation - Standby mode
Clockwise rotation – Active operation
Counter-clockwise rotation – Standby mode
Counter-clockwise rotation – Active operation
Foot switch or foot pedal is connected
IInformation messages
DE
EN
FR
IT
D
ESCRIPTION OF THE UNIT
ES
Please read the user manual thoroughly before using the appliance for the first time.
NL
Thank you very much for choosing the Promed 4030-SX2 manicure / pedicure device. This device may
be used both by qualified specialists and by private people after they have read these instructions for use.
This device is suitable for use in the areas of manicure, nail design (nail art) and pedicure (e.g.: removal of
RU
thickened skin and callus, cuticle care, nail care, treatment of thickened nails etc.) as well as for medical and
cosmetic foot and nail care. The unit is also suitable for use in the area of nail techniques and nail design
as well as the handling of all materials used in this area such as gel and acrylic. We, the manufacturer are
not liable for any injury or damage to people or property which results from ignorance to observe these
PL
instructions.
We wish you a lot of enjoyment with your new Promed 4030-SX2 unit. We would like to familiarize you
SE with the unit in the following sections. Please read the user manual thoroughly before using the unit for the
first time.
FI
Memory setting
The handpiece is blocked or overloaded.
Overheat: The air temperature in the suction turbine housing is higher than 80° C.
The device is switched to the standby mode on the microswitch.
Kaitstud / Secured by https://mereneid.eu/
It is necessary to replace the dust bag.
Please keep this user manual in a safe place!
Suction capacity