Fusing A Fitting - Watts TRITON TRCU1 Guide De L'utilisateur & Manuel D'instructions

All manuals and user guides at all-guides.com
Equipment Setup & Usage Instructions

Fusing a Fitting

NOTICE
Failure to use this equipment as
instructed can result in substan-
dard pipe fusion which may fail
immediately or over time and could
stantial property damage.
warnings and do not use this equipment
unless you know how to operate it cor-
rectly.
building codes, requirements, and stan-
dards.
fusion.
ing contamination in water can prevent
proper fusion.
before performing work. Consult the
Plastic Pipe Institute for list of chemicals
that adversely affect plastic pipe.
(www.plasticpipe.org)
STEP 1 Prepare Pipe for Fusion
NOTICE
Do not use abrasive cloth or emery
paper on pipe to clean.
quality pipe cutter designed for the pipe.
work towel to remove any oils or fluids.
-
taminants.
fusion. Make sure that pipe is free of
water before performing work.
Fittings and Fusers that are the correct
size for the pipe you are fusing.
- Fuser is properly positioned before initiat-
ing fusion.
not stop prematurely.
-
13