Fusion Sequence - Watts TRITON TRCU1 Guide De L'utilisateur & Manuel D'instructions

All manuals and user guides at all-guides.com
Equipment Setup & Usage Instructions

Fusion Sequence

STEP 4
Complete Fusion Process
Once Fuser is activated:
second as fusion takes place.
once per second as fusion takes place.
When fusion is complete:
three times per second; this will repeat
three times for a total of nine pulses and
then return to solid "ready" status.
rapidly three times per second; this will
repeat three times for a total of nine puls-
es and then return to solid "ready" status.
STEP 5
Uncouple Fuser
with thumb. Uncouple Fuser from Fitting.
indicator button will protrude outward
after a successful fusion.
NOTICE
If fusion is interrupted or not
completed successfully:
process. The Control Unit display will read
"Warning! Reflective Error."
flash until Fuser is uncoupled from the
Fitting.
Note: The "Warning! Reflective Error" warning will also appear if:
Fitting.
correctly on the Fitting's weld zone.
second as fusion takes place.
count down time until fusion is complete.
three times per second; this will repeat
three times for a total of nine beeps and
then return to quiet.
Complete!" alternating with "Connection is
Ready When Cool."
Fuse-Tel before fuse Fuse-Tel after
successful fuse
Fuser is uncoupled from the Fitting.
sequence, let Fitting cool 15 minutes then
restart fusion process.
around the Fitting.
15