Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Equipment Setup & Usage Instructions
Assembly
STEP 1
Attach Power Cord
NOTICE
Make sure power (On/Off) switch on
Control Unit is in Off position.
STEP 2
Attach Fuser Cord
has connectors on each end.
STEP 3
Attach Fuser
NOTE: Fusers for use with TRITON are sold separately.
onto the selected Fuser as shown. Make
sure the jaws on the Fuser are closed.
Operating Instructions
WARNING
condition of the equipment. Do not use
if damaged in any way. Do not use if any
parts are missing.
make sure all connections are proper and
secure.
that the electrical outlet is the correct
has a GFCI plug on one end and a female
connector on the other end.
Control Unit.
into the Power Cord receptacle on back
of unit as shown. Push female end of
Power Cord into receptacle securely.
side of the Control Unit. Push one end of
Fuser Cord securely into terminal.
BEFORE each use review
the Important Safety
Information. Do not use the
equipment unless you are familiar with
safe and proper operation.
rating and properly grounded, and test
operation of GFCI plug.
lit, free of clutter, with no distractions, and
accessible only by authorized personnel
and workers.
ground or other stable work surface. Do
not place on ladder or shelf.
11
Publicité
Table des Matières
