BCTINT iVAC Pro Tool Plus Mode D'emploi page 4

3 'Tool Plus'
The 'Tool Plus' unit is used to identify the powered on state of its associated
power tool.
The 'Tool Plus' is physically clamped to the power cord of the power tool.
The method of detecting the status of the power tool is by means of sensing the
magnetic field around the power cord when the power tool is turned on or off.
The 'Tool Plus' is powered by +5VDC. This power is obtained from either a UL
FCC approved AC to DC 5volt USB adaptor, or an associated 'iVAC Pro System'
unit.
If a 'Tool Plus' unit is in the Auto Mode when the associated power tool is
powered on, the 'Tool Plus' unit will transmit an instruction, by means of a digital
wireless signal, to the 'iVAC Pro Switch' instructing it to turn on and apply power
to the Dust Collector.
When the power tool has been turned off, the 'Tool Plus' units will transmit an
instruction to the 'iVAC Pro Switch' telling it to turn off.
The range for radio communications between the 'Tool Plus' and the 'iVAC Pro
Switch' is forty feet.
When mounting the 'iVAC Pro units' they should not be mounted on large metal
objects, since this can affect the communication range.
TP User Guide 4