General Description Of 'Ivac Pro System - BCTINT iVAC Pro Tool Plus Mode D'emploi

2. General Description of 'iVAC Pro System'

The 'iVAC Pro System' consists of two groups of product.
The first group consists of units that transmit information and a second group of
units that receive the transmitted information. At the present time the first group
that transmit information are the 'iVAC Pro Remote' and three versions of the
'iVAC Pro Tool' units. The 'Tool Plus', the 'iVAC Pro Tool', and the 'iVAC Pro
Tool HP'. The 'Tool' units.
The units that receive the information are the 'iVAC Pro Switch' which controls
the Dust Collector and the 'iVAC Pro Blast Gate'.
The 'Tool' units monitor the status of its associated power tool. When the power
tool turns on it sends a digital wireless signal instructing the 'iVAC Pro Switch' to
turn on the Dust Collector and the 'iVAC Pro Blast Gate' to open. .The following
discussions relate to communications with an 'iVAC Pro Switch' although the
same actions/response apply to the 'iVAC Pro Blast Gate'.
This User Guide will focus on the 'Tool Plus'.
TP User Guide 3