Teac MC-D90 Manuel Du Propriétaire page 8

CAUTION Do not plug the power cord of any component into AC outlets and do not turn their POWER switches on until all connections
have been performed.
FM ANTENNA
Connect the FM feeder antenna to the
provided matching transformer. After
completing connection,
transformer into the "FM 75
Extend the top of the "T" and fix with thumb
tacks, or the like, to a wall or window
frame for the best possible reception.
In an area where FM signals are weak, 75-
ohm unbalanced-type outdoor FM
antenna(3 elements
recommended.
FM feeder antenna
(FM outdoor antenna)
1. Turn the terminal cap counterclockwise
to loosen it.
ANTENNA
2. Insert the wire into the terminal fully and
turn the terminal cap clockwise to
securely connect it. Make sure it is
fastened securely by pulling the cord
lightly.
8
Connection of antennas and speakers
plug the
" socket.
Ω
or more) is
SPEAKERS
SPEAKERS
Connect the +terminal(red) to the +terminal(red),the _terminal(black) to the
_terminal(black).
(Powered Subwoofer )
Reproduces powerful and deep bass sounds.
Since subwoofer signals are not amplified, use a subwoofer with a built-in amplifier.
1
2
3
Powered
subwoofer
ENGLISH
AM Loop Antenna
To stand the antenna on a surface, fix the
claw to the slot. After standing it, position it
to find the best direction and position for
radio reception.
In an area where AM signals are weak, use
an external AM antenna.
(External AM Antenna)
AC Power
Press the lever,
insert the stripped
and twisted end of
the
release the lever so
that the cord is held
securely.
cord, then