Publicité
Les langues disponibles
Les langues disponibles
Description
Communication media
PLC => Power line carrier
Identification No.
Operation
The mobile switchable plug:
- can control simultaneously, via the ON, OFF , buttons, a set of products (actors)
that it was linked to during learning
- can be controlled by other leader products; it is then an Actor of the scenario.
- can communicate with radio frequency products via the RF / PLC interface, Cat. No. 036 06 / 29.
As Leader:
The mobile switchable plug allows to control via the ON and OFF buttons:
- lighting points connected to the other products associated with it (the actors) during learning.
Note: learning is required only for the ON button, the OFF button is learnt automatically.
As Actor:
The mobile switchable plug can take part in up to 16 different scenarios, by locally executing the ON, OFF ,
+ and - controls issued by the leader products.
In local mode:
The mobile switchable plug allows to control via the ON, OFF , + and - buttons the lighting point connected to the plug.
Setting the light level of the ON button (excluding learning procedure) :
- Set the level using the + and - buttons
- Press the + and ON buttons at the same time, for 5 seconds
- The load will extinguish and light up again at the ON level
The ON level is now saved.
To save a light level during learning, stage 2 of Scenario learning becomes:
Press
LEARN
(on the actor)
(1) Learning: action of linking product to be controlled simultaneously from a central point.
This linking is performed by applying the Scenario learning procedure on page 7.
(2) Scenario: corresponds to all the products (actors) that are linked to a control button.
(1)
; it is then Leader of the scenario
Press the ON control
button that is to be
linked to the leader
6
LEARN button
(2)
.
Press the + or -
control buttons to set
the desired light level
Control buttons
Publicité
