Cleaning & Maintenance - Lacor MAXI Conseils D'utilisation Et D'entretien

CANISTER FUNCTION
NOTE:
The accessories for performing this function are not included with the
packaging.
Only use this function to vacuum canisters.
1.- Open the Cap and insert the connector from the pneumatic tube into the Air Intake that is
located in the Bell Vacuum
2.- Connect the other side to the orifice on the Cap of the Canister.
3.- Be sure that the LED Pressure Light is in the "Normal" state and press the "Canister" Button.
The pump will begin to suction air out from inside the Canister.
4.- The process will finish when the air inside the Canister has been completely suctioned out.
5.- The process has finished, remember the date of vacuuming and store the Canister wherever
you like.
RECOMMENDED INFORMATION FOR FOOD STORAGE
25ºC
Storehouse
+/- 2ºC
Normal storage
Vacuum sealing
5ºC
Frigorifico
+/- 2ºC
Normal storage
Vacuum sealing
-18ºC
Congelador
+/- 2ºC
Normal storage
Vacuum sealing
1.- Before proceeding to clean the appliance, make sure it is unplugged.
2.- Avoid cleaning the appliance using aggressive or chlorinated products. Never put the
appliance into water. Just use a damp cloth for cleaning the exterior and interior parts. Never
use brushes or steel wools for cleaning.
3.- Dry the appliance after cleaning it and make sure you store it in a dry, well-ventilated place.
4.- The vacuum-packing machine requires no maintenance, but if, through time, you notice that
the vacuum pads, the Teflon strip, the rubber seal or other elements have deteriorated, order
an original spare part from the manufacturer.
34
1-2 weeks 1 week 1 week
1 month 2-4 weeks 2-4 weeks
6 months 6 months 6 months
2-3 years 2-3 years 2-3 years
CLEANING / MAINTENANCE
1-2 weeks 3-4 days
2-4 weeks 2 weeks
3-4 days 2-4 weeks 1-2 weeks 1-2 weeks
2 weeks 1 month 1 month 6-12 weeks
1-2 weeks 8 months 8 months 6-12 weeks
2 years 2-3 years 2-3 years 6 months
3-4 days 1 week 5-6 months
2 weeks 2-4 weeks 1 year
1-2 weeks 2-3 days
6-12 weeks 1 week
4 months
1 year