Main Technical Specifications; Worthy Information - Lacor MAXI Conseils D'utilisation Et D'entretien

MAIN TECHNICAL SPECIFICATIONS

MODEL:
VOLTAGE:
POWER:
PRESSURE:
SEAL LENGHT: 30 cm
SEAL WIDTH:
DIMENSIONS:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the MAXI Vacuum
Machine. We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
The MAXI Vacuum Machine is a product of extensive research and field testing. The materials
used were selected for maximum durability, attractive appearance and optimum performance.
Every unit is thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the MAXI Vacuum Machine into a properly grounded
electrical outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do not match, contact
a qualified electrician to determine the proper voltage and
size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
30
69350
220-240V/50Hz
120 W
0,8 bar Normal / 0,6 bar Gentle
3 mm
43,5x21x10 cm
2,05 Kg

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
!