Maintenance And Cleaning - Lacor HOME Conseils D'utilisation Et D'entretien

e- Press the "Vacuum & Seal" button and press the adapter placed on the lid.
f- When the vacuum process has ended, this function's light will turn off.
g- Take out the end of the adapter placed in the suction nozzle.
h- To open a vacuumed canister, turn the control on the lid clockwise.
1- Before proceeding to clean the appliance, make sure it is unplugged.
2- Avoid cleaning the appliance using aggressive or chlorinated products. Never put the appliance
into water. Just use a damp cloth for cleaning the exterior and interior parts. Never use brushes
or steel wools for cleaning.
3- Dry the appliance after cleaning it and make sure you store it in a dry, well-ventilated place.
4- The vacuum-packing machine requires no maintenance, but if, through time, you notice that
the vacuum pads, the Teflon strip, the rubber seal or other elements have deteriorated, order an
original spare part from the manufacturer.
List of available spare parts:
Ref. R69050A Teflon strip
Ref. R69050B Sealing resistance
Ref. R69050C Upper vacuum foam
Ref. R69050D Lower vacuum foam
Ref. R69050E Sealing rubber tube
Ref. R69050F Adapter for canisters
Ref. R69050G Canister lid
22
MAINTENANCE & CLEANING