Installation Of Calec ® St: Electrical Connection; Commissioning; Configuration Of The Modbus Interface On Calec - aqua metro CALEC ST En Complément Des Instructions De Montage Et D'utilisation

Installation of CALEC
For using the Modbus interface, please connect the cable to clamp 90 (a +) and 91 (b -).

Commissioning

Configuration of the Modbus interface on CALEC

®
For using the CALEC ST with a Modbus interface, please set the necessary Modbus parameter in the CALEC
bus address from 1 to a valid address.
The parameters
• Bus address
• Baud rate
• Parity
are changeable in the menu structure under
Bus Modbus Adr.
Baud
Parity
®
ST: Electrical connection
® ST
®
ST operating menu, e.g.
3