Technical Specifications - VONROC MS506AC Traduction De La Notice Originale

EN

TECHNICAL SPECIFICATIONS

Model No.
Mains voltage
Capacity
Machine class
No load speed
Saw blade measurement
Angle for mitring
Angle for bevelling
Mitre saw maximum sawing
capacity:
Mitre 0° - Bevel 0°
Mitre 45° - Bevel 45°
Mitre 45° - Bevel 0°
Mitre 0° - Bevel 45°
Weight
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration level
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance with
a standardised test given in EN 62841-1; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-5.
1. Lock-off button
2. Handle
3. On/off switch
4. Protective guard
10
MS506AC
230-240 V, 50Hz
1900 W
II (double insulated)
5.000/min
254x2.4x30mm
45° (left and right)
45° (only left)
70x310mm
40x210mm
70x210mm
40x310mm
12.55 kg
94.5+3 dB(A)
108.4+3 dB(A)
<2.5 m/s2
5. Retracting protective guard
6. Saw blade
7. Adjustable fence
8. Knob for table extension
9. Fence
10. Table extension
11. Table
12. Mounting holes
13. Kerf plate
14. Knob for mitre adjustment
15. Lever for mitre adjustment
16. Scale for mitre angle
17. Indicator for mitre angle
18. Laser
19. Indicator for bevel angle
20. Scale for bevel angle
21. Workpiece clamp
22. Knob for bevel adjustment
23. Roller
24. Depth adjustment bolt
25. Slide rails
26. Dust bag
27. Carrying handle
28. Dust outlet
29. Locking bolt for slide rails
31. Stop bolt for 45° bevel angle
32. Stop bolt for 0° bevel angle
33. Screw retraction arm
34. Locking bolt for table extension
35. Locking bolt for adjustable fence
36. Adjustment bolt for fence
37. Front tilt protector
38. Position lock knob
39. Grub screw
40. Screw
41. Clamping flange
42. Clamping bolt
43. Spindle lock
44. Knob for workpiece clamp
45. Plate for depth adjustment
46. Laser switch
48. Screws for laser adjustment
50. Lock nut for 0° bevel angle
51. Fence bolts
3. ASSEMBLY
Before carrying out any work on the
machine, disconnect the mains plug from
the power supply.
WWW.VONROC.COM