Machine Information; Technical Specifications - VONROC S-RS501DC Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
EN
b) Children being supervised not to play with the
appliance.
c) Do not recharging non­rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use
The machine is intended for sawing wood, plastic
and metal while keeping the baseplate resting
firmly on the workpiece. It is suitable for straight
and curved cuts. It is also possible to cut flush to
the workpiece surface. A suitable saw blade must
always be used.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
RS501DC
-
S_RS501DC
CD801AA
S2_RS501DC
2 x CD801AA
S3_RS501DC
CD803AA
S4_RS501DC
CD801AA
8
. If you use an extension
2
Chargers
included
-
CD802AA
CD802AA
CD802AA
CD802AA
Machine information
Rated voltage
No load speed
Saw stroke
Max. saw capacity wood
Max. saw capacity steel
Weight
Sound pressure level L
PA
Sound power level L
WA
Vibration 'sawing wooden
beam'
Vibration 'sawing plywood'
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
20V
0-2800/min
22mm
100mm
10mm
1.57 kg
82.2 dB(A), K=3dB(A)
93.2 dB(A), K=3dB(A)
16.844 m/s
K=1.5 m/s
2
2
18.067 m/s
K=1.5 m/s
2
2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
WWW.VONROC.COM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S2-rs501dcS3-rs501dcS4-rs501dcRs501dc

Table des Matières