Firmware; Configuration Requise; Configuration Système Requise Et Compatibilité : Ios - Shure MV88plus Mode D'emploi

Kit vidéo, microphone électrostatique
Masquer les pouces Voir aussi pour MV88plus:
Table des Matières

Publicité

Issue
Left/right stereo channels do
not match video.
Audio is not in sync with vi­
deo
Recording stops due to ove­
rheating
Unable to share file.
General troubleshooting.
Note: It may be useful to reset the app to restore functionality. Perform a hard reset by unplugging and re­plugging the micro­
phone.

Firmware

Les firmwares sont des logiciels intégrés à chaque appareil pour en contrôler les fonctionnalités. Régulièrement, de nouvelles
versions de firmware sont développées pour incorporer des fonctions supplémentaires et apporter des améliorations. Pour tirer
parti des améliorations en matière de conception, télécharger et installer les nouvelles versions de firmware à l'invite.
Remarque : pour de meilleurs résultats, avant de mettre le traitement numérique des signaux à jour, s'assurer que le micro­
phone est connecté à l'appareil mobile et que l'accu de l'appareil est complètement chargé. Ne pas le débrancher tant que la
mise à jour n'est pas terminée.

Configuration requise

Configuration système requise et compatibilité : iOS
iOS : iOS 14 et supérieur
iPhone : iPhone 6s et supérieur
Solution
Depending on the orientation of the recording device, it may be necessary to engage the
Left-Right swap in MOTIV settings. If the audio has already been recorded, you can
switch the left and right channels in most audio editing software.
Switch to a lower frame rate or resolution size. You might achieve better performance with
a less system intensive frame rate.
MOTIV Video app responds to device overheating by disabling the meter and waveform
display. If device continues to overheat, MOTIV will save your recording and shut down
the app. Ensure that your device has cooled down before starting a new recording.
If a file is too large to be shared, there are a couple options for reducing file size.
Convert your file to a compressed file format.
Connect your mobile device to your computer and use file transfer, like iTunes, to down­
load the file to your desktop.
Split your track in two, export both files and recombine them using audio editing software.
Ensure that your app is updated to the most current version.
Make sure that your phone's operating system is updated to the most current version.
Check to see how the microphone works using a different connection cable or different
device.
Close and restart the application.
Powering down and rebooting the device will clear the cache and can sometimes help
with software performance.
Shure Incorporated
34/39

Publicité

Table des Matières
loading

Table des Matières