Air Flow Direction Adjustment - Hiyasu ASE 18UB Manuel D'instructions

06Manual 2Hiyasu Eng 7/4/06

(5) Air flow direction adjustment

After operation mode is selected, vertical flap will open automatically according to the mode.
Referring to the Fig.
COOL
About 10º
Up and down (Use remote controller)
Press SWING button, vertical flap will move within the range
shown in the Fig. Press SWING button stop it at a fixed posi-
tion.
COOL About 10º
HEAT About 45º
About 60º
Cautions:
It is advisable not to keep vertical flap at downward posi-
tion for a long time in COOL or DRY mode, otherwise,
condensate water might occur.
(6) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closes automatically.
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more
helpful for a better air circulation.
As warm air flows upward in HEAT mode, adjusting air flow downward will be much more
helpful for a better air circulation.
Be careful not to catch a cold when cold air blows downward.
y salir frecuentemente de lugares donde la diferencia
It is harmful to your health in summer to go frequently in and out of places where temp.
difference is above 7oC. Temp. difference of 3-5ºC will remove your fatigue.
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd better set a temp. difference
of 3-5 C between indoor and outdoor temp. in COOL mode.
68
All manuals and user guides at all-guides.com
09:22 Página 68
OPERATION
HEAT
About 60º
Left and right air flow adjustment (manual)
Move the horizontal blade by a knob on air conditioner to
adjust left and right direction referring to Fig.
Cautions:
When humidity is high, condensate water might occur
at air outlet if all horizontal louvers are adjusted to left
or right.
Cautions:
Unit won't restart until 3 minutes have elapsed, due to
system protection. HEAT mode is not available cooling
only unit.