Table des Matières
Publicité
9.2 Refaire la façade d'un foyer de maçonnerie
Utilisation de montants d acier et de panneau de ciment sur les foyers à bois :
Using Steel Studs and Cement Board on Wood Fireplaces
AVERTISSEMENT :
Brick / rock facing may be removed and replaced with non-combustible materials like steel studs and
cement board. Only the facing material can be removed. All other masonry material must not be cut out,
AVERTISSEMENT :
chipped away or removed. The area between the masonry and the cement board, must be sealed so that no
heat can enter the open space between the masonry of the wood fireplace and the re-facing material.
The insert must be pulled out so the face of the fireplace will be flush with the finishing materials.
face avant a eure au nouveau matériau de finition.
Use Cement Board on front and around
Steel Stud enclosure and where needed to
ensure no heat enters any cavities.
Sealant to be used to avoid heat from
entering enclosure
Figure 9.2.01:
Installation
L'encastrable doit être déplacé vers l'extérieur pour que sa
Note:
Note:
firebox must be sealed to avoid heat
entering any cavities.
Original "Zero Clearance"
Wood Burning / Masonry
all areas of the wood burning
fireplace
Steel Studs
Sealant
13
Publicité
Table des Matières
