TypeS BT56208 Directives D'utilisation Et D'entretien page 6

QUICK-CONNECT WIRELESS BACKUP CAM INSTALLATION
A) STANDARD INSTALLATION:
1. Unscrew your license plate.
3. Push and hold the power button of
the Quick- Connect Wireless Backup
Cam for 1 second, the blue LED light
will flash 2 times.
*Please follow your local laws and regulations regarding constant monitoring while driving. It is
recommended that you glance at the image only when in reverse, and use as an aid. Do not rely
solely on the camera view to back up.
*By using the power button on the Monitor, the image can be shut off while driving. Please
remember to turn back on once the vehicle is stopped and ready to reverse.
6
2. Secure the Quick-Connect Wireless
Backup Cam and license plate with
screws back onto the rear of your vehicle.
Blue LED light
4. Power on the Monitor with the 12V/24V
Wake-up button
adapter. You can see the parking view when
you wake up the Quick-Connect Wireless
Backup Cam through wake-up button or
motion trigger in front of Monitor.